500Kva Dry Type Transformer-manufacture,factory,supplier from China

The S22-500 is an oil-immersed transformer with a rated capacity of 500kVA (kilovolt-amperes). This model belongs to the S22 series, representing the new generation of high-efficiency and energy-saving distribution transformers.

Technical Parameters (Example):Rated Capacity: 500 kVAVoltage Level: Depending on the specific model, generally 10/0.4 kV or similar configurations.Frequency: 50 HzConnection Group: Dyn11 or other specified typesShort Circuit Impedance: Typically less than 6%No-load Loss: Much lower than traditional silicon steel sheet transformersLoad Loss: Also reduced compared to traditional transformersNoise Level: Relatively lowProtection Level: IP23 or higherPlease note that the above parameters are for reference only, and the specifications of the actual product may vary.

Main Features:Energy-efficient and high-performance: Utilizing amorphous alloy materials, it significantly reduces no-load and load losses, enhancing the energy efficiency ratio.Safe and reliable: High-quality insulating materials are used, and explosion-proof devices are equipped to ensure operational safety.Low-noise operation: The core and winding structure are optimized to effectively reduce noise levels during operation.Strong resistance to short circuits: Amorphous alloy materials have high mechanical strength, capable of withstanding large short-circuit current shocks.Compact and lightw

The SCB14-1000 is a state-of-the-art, three-phase dry-type power transformer with an encapsulated structure, specially designed using high-quality epoxy resin for insulation. It incorporates advanced foil winding technology on the high-voltage side. With a rated capacity of 1000kVA and voltage ratings of 10kV/0.4kV, this transformer is engineered for high performance and efficiency.

The SCB14-200 is a three-phase dry-type power transformer featuring an encapsulated structure cast in high-quality epoxy resin. The transformer utilizes advanced foil winding technology on the high-voltage side, delivering a rated capacity of 200kVA and voltage levels of 10kV on the high-voltage side and 0.4kV on the low-voltage side.

The SCB14-630 is a robust and high-performance three-phase dry-type power transformer with an encapsulated structure made of epoxy resin. Designed with advanced foil winding technology on the high-voltage side, this transformer offers a rated capacity of 630kVA and operates with voltage levels of 10kV/0.4kV.

The SCB14-800 is a high-capacity, three-phase dry-type power transformer with an encapsulated structure, cast in epoxy resin. Featuring advanced foil winding technology on the high-voltage side, this transformer delivers a rated capacity of 800kVA and operates at voltage levels of 10kV/0.4kV.

The SCB14-100 is a three-phase dry-type power transformer, featuring an encapsulated structure that is cast in high-quality epoxy resin. The transformer is designed with foil winding technology on the high-voltage side, ensuring optimal performance and high efficiency.

The SCB14-1250 is a three-phase dry-type power transformer designed with an encapsulated structure cast in epoxy resin. This transformer incorporates advanced foil winding technology on the high-voltage side, offering superior thermal management and energy efficiency.

The SG-30KVA three-phase dry-type isolation transformer is manufactured using high-quality materials and advanced technology, suitable for various power supply occasions with AC 50/60Hz, and input and output voltages not exceeding 500V.Dry Type Transformer  Technical Parameters Capacity: 30KVAThree Phase Dry Type Transformer Input Voltage: 380V (can be customized according to customer requirements)Output Voltage: 220V (can be customized according to customer requirements)Transformer Connection Group: D/yn11Transformer Operating Environment Temperature: -15℃～+40℃Transformer Effic

The SCB14-125 is a three-phase dry-type power transformer designed with an encapsulated structure, cast in high-quality epoxy resin. It features foil winding technology on the high-voltage side, ensuring optimal performance and efficiency.

The SCB14-80 is a highly efficient three-phase dry-type power transformer with an encapsulated structure cast in epoxy resin. This transformer utilizes advanced foil winding technology on the high-voltage side, ensuring robust performance and energy efficiency.

The SCB14-50 is a three-phase dry-type power transformer with an encapsulated structure cast in epoxy resin. The high-voltage side employs foil winding technology, with a rated capacity of 50kVA and voltage levels of 10kV/0.4kV.

The SCB14-400 is a high-performance three-phase dry-type power transformer with an encapsulated structure cast in epoxy resin. The transformer utilizes foil winding technology on the high-voltage side and is designed for applications requiring reliable power distribution.

The SCB18-50kVA Dry Transformer is a high-performance, safe, and efficient power distribution solution designed without the use of transformer oil, making it particularly suitable for indoor environments and applications where environmental sensitivity is a priority. This dry-type transformer combines advanced materials and technology to ensure reliable operation, low maintenance, and high energy efficiency.Key Features:Safe and Flame Retardant: The SCB18-50kVA transformer is designed with safety in mind, featuring a pollution-free and explosion-proof structure.

Main Features:This transformer features amorphous alloy materials that significantly reduce no-load and load losses, improving energy efficiency. The low-loss design lowers both hysteresis and eddy current losses, resulting in enhanced energy savings, particularly compared to traditional silicon steel transformers. Over time, this design helps reduce electricity consumption.For safety and environmental protection, the transformer utilizes high-quality insulating oil or dry-type designs that offer excellent insulation and heat dissipation.

Product DetailsThe SCB18-1000kVA Dry Transformer is a high-performance, reliable, and safe solution for power distribution. Designed without transformer oil, it is ideal for indoor installations and environmentally sensitive applications, providing an efficient and secure power supply with minimal environmental impact.Key FeaturesSafe and Flame Retardant: The SCB18-1000kVA transformer is pollution-free, explosion-proof, and features a high flame-retardant rating, ensuring safe and secure operation in high-risk environments.

Product DetailsThe SCB12-630kVA Dry Transformer is a reliable, safe, and efficient power distribution solution that does not require transformer oil.

Technical SpecificationsRated Capacity: 1600kVARated Voltage: High-voltage side 10kV, Low-voltage side 0.4kVRated Current: High-voltage side approximately 88.68A, Low-voltage side approximately 3632.5AConnection Group Number: Dyn11Insulation Thermal Class: Class F or Class HWinding Temperature Rise Limit: 100K (Class F) or 125K (Class H)Partial Discharge Quantity: Less than 5pcShort Circuit Impedance: 4% to 6%Frequency: 50HzCooling Method: Natural Air Cooling (AN) or Forced Air Cooling (AF)Protection Level: IP20 or IP23Noise Level: Typically not exceeding 55dBApplication AreasThe SCB18-1600 dr

Product DetailsThe SCB12-100kVA Dry Transformer is a highly reliable, safe, and efficient power distribution solution, specifically designed to operate without transformer oil.

Product DetailsThe Dry transformer is a reliable, safe, and efficient solution for power distribution, designed without the need for transformer oil, making it ideal for indoor and environmentally sensitive applications.Key FeaturesSafe and Flame Retardant: The transformer is pollution-free, explosion-proof, and has a high flame-retardant rating, ensuring safe operation.Energy Efficiency: Offers low loss, low noise, and low temperature rise, providing significant energy savings.Strong Overload Capacity: Equipped with F-class insulation for excellent heat resistance and robust performance under

Product DetailsThe SCB12-1250kVA Dry Transformer offers a reliable, safe, and efficient solution for power distribution.

Technical ParametersRated Capacity: 2500kVARated Voltage: High-voltage side 10kV, low-voltage side 0.4kVRated Current: High-voltage side approximately 125A, low-voltage side approximately 5982AConnection Group Number: Dyn11Insulation Thermal Class: Class F or Class HWinding Temperature Rise Limit: 100K (Class F) or 125K (Class H)Partial Discharge Quantity: Less than 5pcShort Circuit Impedance: 4% to 6%Frequency: 50HzCooling Method: Natural Air Cooling (AN) or Forced Air Cooling (AF)Protection Level: IP20 or IP23Noise Level: Generally not exceeding 55dBApplication ScenariosThe SCB14-2500 dry-ty

Product DetailsThe SCB12-400kVA Dry Transformer is a dependable, safe, and energy-efficient solution for power distribution.